Visualizing Your Data With HtmlPivotViewer

The HtmlPivotViewer jQuery control is a great way to explore datasets in a web browser. The Virtuoso HtmlPivotViewer application extends this control to add a SPARQL query editor, sharing with social media, and Google translation. This guide shows you how to install and configure the Virtuoso HtmlPivotViewer application to view existing data sets and how to configure Virtuoso so that you can generate collections from your own data.

Part 1. Viewing Collections

Prerequisites

  • A Virtuoso Server with the following VAD packages installed:
    • The c_uri_dav.vad VAD. This package contains a URL shortener that the HtmlPivotViewer application relies on to shorten the very long URIs that can result from generating a collection from a query.
    • The html5pivotviewer_dav.vad VADHtmlPivotViewer VAD. This VAD is included in the HtmlPivotViewer project that can be downloaded as either a zip file or compressed tar archive. The VAD package contains the HtmlPivotViewer application.

Once these VAD packages are installed, viewing an existing collection is as simple as pointing your browser to the HtmlPivotViewer application on your server, i.e. -- 


http://your server address:your server port/HtmlPivotViewer

-- and typing the collection address in the box on the page.



Alternatively, you can specify the address of the collection as a parameter to the URL, e.g. -- 


http://{your server address}[:{your server port}]/HtmlPivotViewer?url=http%3A%2F%2Ftweetpivot.com%2Fcollections%2Ffriends_kidehen.cxml
Note: The collection address must be URL Encoded if given as part of the URL.

You can now start exploring existing pivot collections.

Part 2. Generating your own Collections

Once you have the HtmlPivotViewer installed, you will want to start generating pivot collections from your own data. There are a number of ways ways you can do this.

One method is to generate a collection from the results of a SPARQL query. The HtmlPivotViewer includes its own SPARQL query editor, or you can use the SPARQL endpoint on any Virtuoso server.

Alternatively, you can generate a collection from a result set created in the facet browser.

You will need to install some additional packages, whichever method you use.

Prerequisites

  • The SPARQL-CXML VAD (sparql_cxml_dav.vad). This package supports generating a collection from a SPARQL endpoint, and it is also required to use the SPARQL editor in the Virtuoso HtmlPivotViewer. It also installs some example data that will be used in the rest of this guide.
  • The Virtuoso ImageMagick and QR Code plugins needs to be enabled. In your virtuoso.ini, in the [Plugins] section, make sure you have lines for "plain, im" and "plain, qrcode", like this -- 

    [Plugins]
LoadPath=../hosting
...
Load6=plain, im
Load7=plain, qrcode

    Remember to restart Virtuoso if you make any changes to your virtuoso.ini.
Note: The SPARQL-CXML package extends the SPARQL endpoint on the Virtuoso server where the package is installed. This extension is required to be able to generate a pivot collection from the query results. It is however possible to generate a pivot collection from a query against a third-party SPARQL endpoint or from a Virtuoso SPARQL endpoint that does not have the package installed, by using a SPARQL-FED query from the Virtuoso instance that does have the SPARQL-CXML package installed.

2.1 Generating a Collection from a SPARQL Query In HtmlPivotViewer

The HtmlPivotViewer application contains its own SPARQL editor. In this example, you will see how to generate a collection from a simple DESCRIBE query; and also how to generate a collection from a SPARQL SELECT query, and then modify the query to meet your specific requirements.

2.1.1 Generating the Collection - Using a SPARQL DESCRIBE

Point your browser at the HtmlPivotViewer application on your server, i.e. -- 


http://your server address:your server port/HtmlPivotViewer

-- and then select the Edit link in the top-right-corner. You can type your query directly into the Query Text box in the form. The simplest way to get an overview of the data in a particular graph is to use a SPARQL DESCRIBE query. For example: 


DESCRIBE ?s 
  FROM <http://pivot_test_data/ski_resorts> 
  WHERE {?s  ?p  ?o}

creates a collection where each item is a ski resort with various facets giving further information about each resort.



Click on the View button at the foot of the page to view the collection in HtmlPivotViewer.



Note: If at this point you see the HtmlPivotViewer but it is completely empty, then it is likely that the SPARQL-CXML VAD has not been correctly installed. However, if you see the HtmlPivotViewer with the filter pane correctly loaded but no item images showing and if the position of the images can be highlighted, then it is likely that you have not enabled the ImageMagick plugin for Virtuoso.

2.1.2 Generating the Collection - Using a SPARQL SELECT

If you want more control over the way the collection is generated from your data you can use a SELECT query. This simple SELECT query will return all of the items in the http://pivot_test_data/ski_resorts graph, part of the example dataset. In the following sections you will see how this simple query can be modified to change the way that collection is generated. 


SELECT * 
  FROM <http://pivot_test_data/ski_resorts>
  WHERE {?s ?p ?o}

Execute the query and display the results in HtmlPivotViewer by clicking the View button at the foot of the edit form.



You should see the collection like this:



If you want to save or share the query, you can do so using the permalink at the top-right-corner of the page. If you need to fine tune your query, you can return to the editor by clicking on the Edit link. For example, the query that we used to generated this first collection gives us all the items in the ski resorts graph. We can easily change it to get the items in the campsite graph by changing the from clause in the query: 


SELECT * 
  FROM <http://pivot_test_data/campsites>
  WHERE {?s ?p ?o}




Then click on View to see the new collection.



Alternatively, we can see both campsites and ski resorts using the following query: 


PREFIX  ski:   <http://www.openlinksw.com/ski_resorts/schema#>
PREFIX  camp:  <http://www.openlinksw.com/campsites/schema#>

SELECT * 
  WHERE
  {
    { ?s  a   ski:SkiResort  .  
      ?s  ?p  ?o
    }
    UNION
    { ?s  a   camp:Campsite   .
      ?s  ?p  ?o
    } 
  }








2.1.3 Item Images

In the examples so far, all items are represented by the same icon. It would be helpful if different items had different images. We have reserved some special variables in the SPARQL query to help control collection generation, and one of those variables is ?image. If we can find an image of the item in the collection and call it ?image, then when the collection is generated that item will be represented by its image. So, for example, we can use the following query to find images of some of the ski resorts in the example dataset -- 


PREFIX  ski:   <http://www.openlinksw.com/ski_resorts/schema#>
PREFIX  camp:  <http://www.openlinksw.com/campsites/schema#>

SELECT * 
  WHERE
  {
    { ?s  a   ski:SkiResort  .  
      ?s  ?p  ?o             .  
      OPTIONAL { ?s  foaf:depiction  ?image } 
    }
    UNION
    { ?s  a   camp:Campsite   .  
      ?s  ?p  ?o              .  
      OPTIONAL { ?s  foaf:depiction  ?image } 
    } 
  }




It would also be helpful to distinguish between the different types of items; in this case, the ski resorts (without images) and the campsites. Even if an item does not have its own image, we can change the default image depending on the type of the item. To do this we use another reserved variable, ?itemtype. Our example query then becomes -- 


PREFIX  ski:   <http://www.openlinksw.com/ski_resorts/schema#>
PREFIX  camp:  <http://www.openlinksw.com/campsites/schema#>

SELECT * 
  WHERE
  {
    { ?s  a   ski:SkiResort . 
      ?s  ?p  ?o            ; 
          a   ?itemtype     .  
      OPTIONAL { ?s  foaf:depiction  ?image } 
    }
    UNION
    { ?s  a   camp:Campsite  .
      ?s  ?p  ?o             ;
          a   ?itemtype      .  
      OPTIONAL { ?s  foaf:depiction  ?image } 
    } 
  }

-- and we can clearly see which items are campsites.



2.1. Item Names

If one of the campsite or ski resort items is selected in HtmlPivotViewer, the info box opens on the right hand side of the page. It is headed with the name of the item, but in our example that name is in fact a URI for the item.



In our example, just the name of the item would be sufficient, and it would be more readable. In the case of the campsites, we can use the rdfs:label as the name, while in the case of the ski resorts, we need to use the ski:resort_name. The pattern is optional in case some of the items do not have the necessary attribute defined -- 


PREFIX  ski:   <http://www.openlinksw.com/ski_resorts/schema#>
PREFIX  camp:  <http://www.openlinksw.com/campsites/schema#>

SELECT * 
  WHERE
  {
    { ?s a  ski:SkiResort . 
      ?s ?p ?o            ;
         a  ?itemtype     . 
      OPTIONAL { ?s  ski:resort_name  ?name  } . 
      OPTIONAL { ?s  foaf:depiction   ?image } 
    }
    UNION  
    { ?s  a   camp:Campsite  . 
      ?s  ?p  ?o             ; 
          a   ?itemtype      . 
      OPTIONAL { ?s  rdfs:label       ?name } . 
      OPTIONAL { ?s  foaf:depiction  ?image } 
    } 
  }




2.1.5 Facets

The collection we are have generated has two facets, called virtcxml:FacetP and virtcxml:FacetO, that map to the predicate (?p) and object (?o) as returned by the simple, generic ?s ?p ?o pattern that we have in the WHERE clause of the SPARQL SELECT that we are using. We can control which facets the items in the collection have by having a separate pattern for each facet that we are interested in, and by giving them meaningful names. Some facets will be available on all items, while some will only be relevant to one type of item. For example, all items in our collection have a country code, but only the ski resorts have altitude facets. 


PREFIX  ski:   <http://www.openlinksw.com/ski_resorts/schema#>
PREFIX  camp:  <http://www.openlinksw.com/campsites/schema#>

SELECT * 
  WHERE
  {
    { ?s  a                        ski:SkiResort         . 
      ?s  a                        ?itemtype             ; 
          geonames:countryCode     ?country              ;
          ski:resort_name          ?name                 ;
          ski:beginner_slopes      ?beginner_slopes      ;
          ski:intermediate_slopes  ?intermediate_slopes  ;
          ski:advanced_slopes      ?advanced_slopes      ;
          ski:expert_slopes        ?expert_slopes        ;
          ski:altitude_m           ?altitude             .
      OPTIONAL { ?s  foaf:depiction  ?image } 
    }
    UNION  
    { ?s  a                        camp:Campsite         . 
      ?s  a                        ?itemtype             ; 
          geonames:countryCode     ?country              ; 
          rdfs:label               ?name                 ;
          campsite:resort_type     ?resort_type          ;
          campsite:resort          ?resort               ;
          campsite:region          ?region               ;
          campsite:category        ?category             . 
      OPTIONAL { ?s  foaf:depiction  ?image } 
    }
  }




2.2 Generating a Collection from a SPARQL Endpoint

The SPARQL-CXML VAD package extends the Virtuoso SPARQL endpoint to add "CXML collection" as an alternative output format for query results. This example uses the same basic query that was used in the previous section, but executes it in the Virtuoso SPARQL endpoint.

2.2.1 Generating the Collection

The first step in generating the collection is the SPARQL query that returns the results that you are interested in. Point your browser at the Virtuoso SPARQL endpoint. It will be here: 


http://your server address:your server port/sparql

The following query will return all items in the http://pivot_test_data/ski_resorts graph, part of the example dataset -- 


SELECT * 
  FROM <http://pivot_test_data/ski_resorts>
  WHERE {?s  ?p  ?o}

By default, the results will be shown as a table in your browser. We need the results as a HtmlPivotViewer collection. Alternate result formats can be selected in a drop-down box below the query form. Choose CXML (Pivot collection) --



Run the query and, depending on your browser, the result set may now be displayed as XML. If you are using Safari, you will just see a blank page, but if you view the source of the page you will see the XML. To use this collection in HtmlPivotViewer, you simply copy the contents of the browser's address bar, and use that as the collection address in HtmlPivotViewer. So, open HtmlPivotViewer, paste the address from the SPARQL query results in the collection URL box, and click submit.



You should see the collection like this:



Once you have opened the collection in HtmlPivotViewer, any additional editing of the query can be done using the HtmlPivotViewer editor by simply clicking on the Edit link at the top right hand corner.

Tip: If a query in the HtmlPivotViewer editor is failing, pasting it into the Virtuoso SPARQL endpoint and attempting to run it there may reveal some additional error information which may help you resolve the problem.

2.3 Generating a Collection Using The Facet Browser

Using the Facet browser to create collections requires some extra packages. Once these packages are installed, generating the collection is very straightforward. You use the Facet browser to create a result set; then click on the Make Pivot Collection link.

Prerequisites

  • The Cartridges VAD (cartridges_dav.vad). This package provides base RDF functionality and the Sponger framework for converting non-RDF data to RDF.
  • The Virtuoso Facets web service (fct_dav.vad) A general purpose RDF query facility for facet based browsing.
  • The Facet Pivot Bridge (fct_pivot_bridge.vad). This package extends the Facets web service so a collection can be generated from the faceted query result sets.

2.3.1 Generating the Collection

The Facet browser service will be found at 


http://your server address:your server port/fct




Type the word "resort" in the search box. This should find both the campsites and the ski resorts. The result set can be manipulated to only include the items that you are interested in. For example, by selecting Types in the Entity Relations Navigation pane, you can limit the result set to just items of the type ski:SkiResort.



Once you have the result set that you want, click on the Make Pivot Collection link at the top of the page. This creates the collection, and opens it in HtmlPivotViewer.



2.4 Generating a Collection from iSPARQL

To generate a collection from the iSPARQL interface, you will need to install an extra package.

Prerequisites

  • The iSPARQL VAD (isparql_dav.vad). This package installs iSPARQL, a graphical utility for building and executing SPARQL queries.

2.4.1 Generating the Collection

Point your browser at the iSPARQL interface on your server. It can be found at 


http://your server address:your server port/isparql

It will open to a page like this:



From the three tabs in the top center, choose the Advanced tab. This will open a page where you can type in a query. Use the following DESCRIBE query: 


DESCRIBE ?s 
  FROM <http://pivot_test_data/ski_resorts> 
  WHERE {?s  ?p  ?o}




Click on the arrow-in-a-blue-circle to run the query. The results page will be opened, showing the ski resorts that have been found.



To make a pivot collection from these results, simply click on the Make Pivot link in the top left corner of the results pane. This will open the link in the HtmlPivotViewer.



Related